Two-way Four-way Hydraulic Electromagnetic Directional Valve 24BI1/2/3 24DI3-B10H-T 24EI3-B10H-T 24BI3-B10H-T

1. Technical parameters:
Diameter: 10mm.
Pressure: The rated pressure can generally reach 31.5MPa.
Median function: Type I3.
Oil port connection: The T oil port must be connected back to the oil pipeline. The allowable back pressure is 6.3MPa. The 10-pipe diameter valve has two T oil ports. When in use, either one can be selected.2. Working Principle:
This valve is mainly composed of a valve core, a valve body, and an electromagnet etc. When the electromagnet is energized, it generates an electromagnetic force to attract the valve core, causing it to shift within the valve body, thereby changing the on-off state of the oil circuit and the flow direction of the hydraulic oil. When the electromagnet is de-energized, the valve core returns to its initial position under the action of the spring force, and the oil circuit also returns to its initial state accordingly. In this way, the movement direction control of the actuating elements in the hydraulic system is achieved.

3. Product Features and Advantages:
External leakage is completely blocked, and internal leakage is easy to control: The electromagnetic force acts on the iron core sealed in the magnetic isolation sleeve to complete the action, and there is no dynamic seal. External leakage is easy to be completely blocked, and the structural form is also easy to control internal leakage.
The system is simple and inexpensive: It has a simple structure and a relatively low price. The automatic control system it forms is also relatively simple, inexpensive, and easy to connect with industrial control computers.
Fast action and low power consumption: The response time is short, and even pilot-operated hydraulic valves can be controlled within tens of milliseconds. The coil power consumption is very low, and the size is small, which saves space and is both lightweight and aesthetically pleasing.

4. Usage functions and purposes:
It is mainly used to control the flow direction of hydraulic oil in hydraulic systems, and to achieve functions such as starting, stopping, and direction conversion of hydraulic actuating elements. It is widely applied in the industrial field, such as the hydraulic systems of machine tools, presses, injection molding machines, and other equipment, and can also be used in construction machinery, metallurgical machinery, and other occasions that require hydraulic control.

5. Applicable machines and scenarios:
It is applicable to various mechanical equipment that requires precise control of the movement direction of hydraulic actuating elements, such as excavators, loaders, bulldozers, etc. in construction machinery, as well as hydraulic lifting mechanisms and hydraulic fixtures in metallurgical equipment. It is also used in scenarios such as automated production lines and ship steering gears.

6. Similar models:
24EI1-H6B-T24EI1-H6B-T24EI2-H6B-T24EO-F6B 24V/220V24EI3-H6B-T24BI1-H6B-T24EY-H6B-T24BI2-H6B-T24BI3-H6B-T24BI1-B10H-T24BI2-B10H-T
24DI1-B10H-T24DI3-B10H-T24EI3-B10H-T24BI3-B10H-T24BY-H10B-T24EI1-H10B-T24EN-H10B-T24BI1-H10B-T24BI2-H10B-T24BI3-H10B-T
24D1I1-H10B-T24BI3-B10H-TLH24BI1-B20H-T24BI2-B20H-T24DI1-B20H-T24DI3-B20H-T24EI3-B20H-T24BI3-B20H-T

7. Precautions for Use
Installation: When installing, the coil of the valve should be facing upwards and kept in a vertical position. The arrow or mark on the valve should be consistent with the flow direction of the pipeline. Avoid installing the valve in the low-lying areas of the pipeline, places where water splashes or leaks.
In terms of pressure, it should be used within the rated pressure range to avoid overpressure operation; otherwise, the valve may be damaged.
In terms of flow rate: The flow rate through the valve should match the rated flow rate to avoid problems such as vibration and pressure loss caused by too small or too large a flow rate.
In terms of oil: Use clean hydraulic oil and regularly check the cleanliness and viscosity of the oil to prevent oil contamination from causing valve core jamming or wear.
Electrical aspect: Do not use power supplies exceeding the voltage standard. Do not connect wiring when powered on. Ensure good grounding to avoid electromagnetic interference.